|
Eidoll Sales the The new energy Hi-pot current fuse,Bellow are the specification:
一、5*20mm Hi-pot specification as bellow:
1.MODEL NUMBER AND SAFETY CERTIFICATION
·
Model Number: Part Number+Rated Current+Rated Voltage+Approvals.
example:
5CH
1A 1000V 1) Part Number
2)Rated Current
1）
2） 3）
3)Rated Voltage
1-2 Rated Current And Voltage
Rated Current: 63mA~1
Rated Voltage: 500V/600V/1000V AC/DC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic Symbol+Rated Voltage
63mA~800mA : _mA500V/600V/1KV 1A~1:_A500V/600V/1KV
Trade mark:The Manufacture’s Logo+Part Number+Approvals
63mA~1:
Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)
3-2Structure
|
No.
|
Component
|
Material
|
Quantity
|
|
(1)
|
Wire
|
Alloy
|
1
|
|
(2)
|
Cap
|
Brass with mickel plated
|
2
|
|
(3)
|
Body
|
CERAMIC Tube
|
1
|
|
(4)
|
Lead
|
Tinned Copper wire
|
2
|
4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.
5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Breaking capacity(Time Lag and Fast Acting)
|
15000A
|
500/600V/1KV/3KV
|
AC/DC
|
b、Electrical characteristics
Time Lag（CCC/VDE）
|
RATED CURRENT
|
2.1IN
|
2.75IN
|
4IN
|
10IN
|
|
32mA to 100mA
|
Max.
|
Min.
|
Max.
|
Min.
|
Max.
|
Min.
|
Max.
|
|
30 min.
|
1S
|
80S
|
95mS
|
5S
|
10mS
|
100mS
|
|
大于100mA
|
30 min.
|
1S
|
80S
|
150mS
|
5S
|
20mS
|
100mS
|
Fast Acting
|
RATED CURRET
|
2.1IN
|
2.75IN
|
4IN
|
10IN
|
|
大于50mA
|
Max.
|
Min.
|
Max.
|
Min.
|
Max.
|
Max.
|
|
30 min
|
10ms
|
2S
|
3ms
|
300ms
|
20ms
|
UL
|
Rated current
|
1IN
|
1.35IN
|
2IN
|
|
MIN
|
MAX
|
MAX
|
|
63mA~1
|
4Hrs
|
1hr
|
5Sec
|
c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.
d、Approvals
|
Catalogue number
|
Rated current
|
Voltage
|
|
|
5CFP/5CTP
|
63mA~1
|
500/600V/1KV
|
7. ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.
8.SOLDERING PAAMETERS
8-1Wave Solder
Soldering Temperature:260±5℃
Soldering Time:4 Sec.Max.
8-2Manual Solder
Soldering Temperature: 350±5℃
Soldering Time: 3 Sec. Max.
OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.
二、 6.35*32mm the specification of Hi-pot current fuse as bellow:
635*32mm Hi-pot current fuse the specifications as below,：
1.MODEL NUMBER AND SAFETY CERTIFICATION
1-1 Model Number: Part Number+Rated Current+Rated Voltage+Approvals.
example:
6CFUP 10A 500V 1)Part Number
2)Rated Current
1） 2） 3） 3)Rated Voltage
1-2 Rated Current And Voltage
Rated Current: 63mA~30A
Rated Voltage: 500V/600V AC/DC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic Symbol+Rated Voltage
63mA~800mA : _mA250V/500V 1A~30A:_A250V/500V
Trade mark:The Manufacture’s Logo+Part Number+Approvals
63mA~30A:
Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm）
3-2Structure
|
No.
|
Component
|
Material
|
Quantity
|
|
(1)
|
Wire
|
Alloy
|
1
|
|
(2)
|
Cap
|
Brass with mickel plated
|
2
|
|
(3)
|
Body
|
CERAMIC Tube
|
1
|
|
(4)
|
Lead
|
Tinned Copper wire
|
2
|
4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.
5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Breaking capacity(Time Lag and Fast Acting)
b、Electrical characteristics
Fast Acting(refer to UL)
|
Rated current
|
135%
|
200%
|
|
63mA~30A
|
Max.
|
Max.
|
|
1 hour
|
120 sec
|
c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.
d、Approvals
|
Catalogue number
|
Rated current
|
Voltage
|
refer to CQC,UL
|
|
6CFUP
|
63mA~30A
|
250V/500V
|
7.ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.
8.SOLDERING PAAMETERS
8-1Wave Solder
Soldering Temperature:260±5℃
Soldering Time:4 Sec.Max.
8-2Manual Solder
Soldering Temperature: 350±5℃
Soldering Time: 3 Sec. Max.
9.OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.
三、10*38mm the spefication of Hi-pot current as bellow:
1.MODEL NUMBER AND SAFETY CERTIFICATION
· Model Number: Part Number+Rated Current+Rated Voltage+Approvals.
[example]:
10HCU 40A 500V 1)Part Number
2) Rated Current
1）
2） 3） 3) Rated Voltage
1-2 Rated Current And Voltage
Rated Current: 100mA~50A
Rated Voltage:125V/250V~1000V AC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic Symbol+Rated Voltage
100mA~800mA : _mA500V 1A~50A:_A500V
Trade mark:The Manufacture’s Logo+Part Number+Approvals
100mA~500A:
Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)
3-2Structure
|
No.
|
Component
|
Material
|
Quantity
|
|
(1)
|
Wire
|
Alloy
|
1
|
|
(2)
|
Cap
|
Brass with mickel plated
|
2
|
|
(3)
|
Body
|
CERAMIC Tube
|
1
|
4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.
5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Electrical characteristics
Fast Acting
|
Rated current
|
135%
|
200%
|
|
100mA~50A
|
Max.
|
Max.
|
|
1 hour
|
120 sec
|
b、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.
7.ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.
8.OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.
|
